CNC Fiber Laser Cutting Equipment Laser Cutters for Metal
2021-06-20
Product Feature:
1) Positioning automatically, no need any jig or fixture;
2) Any pattern and format ok for cutting via CNC laser control system with computer control;
3) Sealed design for rack and guide rail to make sure longer lifetime and higher precision;
4) No need reflection mirror, lower maintenance cost;
5) No need any adjustment for laser route;
Parameter
Model | GS-LFD3015 |
Laser source medium | Fiber |
Laser power | 500W - 1500W |
Cutting range(L*W) | 3000 mm × 1500 mm |
Z axle stroke | 100 mm |
Max. cutting speed | 36 m/min |
Max. positioning speed | 120 m/min |
Wok platform size/Max height of feeding material | 4250x2500mm / more than 120mm |
Cooling form | water cooling |
Laser wavelength | 1070 nm |
Min. cutting gap | ≤0.1 mm |
Positioning accuracy of X, Y and Z axles | ±0.03 mm |
Repeated positioning accuracy of X, Y and Z axles | ±0.01 mm |
Thickness of cutting material (according to material) | 0.2-14 mm |
Drive model | Imported servo motor |
Power requirement | 380V, 50 / 60Hz |
Working temperature | 5 - 45 ºC |
Continuous working time | 24 Hours |
Machine weight | About 6750 Kgs |
Outer dimension | 4270 mm * 2280 mm * 1750 mm |
Total protection level of power supply | IP54 |
Advanced Control Function:
1. Height sensor automatic calibration function:
Manual height sensor calibration is inconvenient and cumbersome, and requires high level operators. With the PA8000 laser cutting system using automatic calibration method, no cumbersome operations are needed, and the CNC laser cutter can rapidly calibrate the height sensor automatically.
2. Change to pulsing at corner cutting control function:
When the sharp corner of a thin to medium carbon steel sheet is cut, melting loss will occur easily, so the quality of the cutting section of the sharp corner can't be guaranteed. With the PA8000 laser cutting system using the change to pulsing at corner cutting control function, the laser power, pulse frequency and pulse duty factor are changed for sharp corner cutting, and the CNC laser cutter restores the previous control mode after passing the sharp corner, thus guarantees the section quality of outline cutting of sharp corners and the efficiency of cutting.
3. Pause and deceleration at corner function:
In the fusion cutting of high temperature alloy sheets such as stainless steel and aluminum alloy sheets, etc., the sharp corners are hard to cut, with back splattering and contamination of focus lens occurring easily. With the PA8000 laser cutting system using the pause and deceleration at corner function, dross back splattering seldom occurs, thus significantly improves the stability of sharp corner cutting of such alloy sheets, reduces the contamination of focus lens, and prolongs the useful life of focus lens.
4.Leader-line low start-up speed cutting function:
In the fusion cutting of high temperature alloy sheets such as stainless steel and aluminum alloy sheets, etc., dross back splattering and sensor collision alarm, etc. occur easily, which will cause abnormal interruption of cutting and contamination of lens. With the PA8000 laser cutting system using the leader-line low start-up speed cutting function, the leader-line low start-up speed cutting mode can be selected according to the characteristics of fusion cutting of such alloy sheets, thus significantly improves the stability of fusion cutting of such alloy sheets, eliminates dross back splattering and easy interruption of cutting, significantly reduces the contamination of focus lens, and prolongs the useful life of focus lens.
Widely used in sheet metal processing, aviation, aerospace, electronics, electrical appliances, tube fittings, automobile, food machinery, engineering machinery, precision parts, ships, metallurgical equipment, elevators, household appliances, kitchen utensils and appliances, craft gifts, tool processing, decoration, advertising and other manufacturing industries.
HANS GS FAQ:
1.Q: Are you a factory or trading company?
A:We are a manufacturer with $13 million registered capital & 20000 square meters Han's Goldensky Science and technology park.
2.Q: What is the payment terms?
A:The payment terms we accept include: Western Union, Cash, L/C, T/T (30% advance payment as deposit, 70% balance payment should be paid before shipment.)
3.Q: How long is the delivery date?(After getting the deposit)
A: It is different from 25-45 workdays according to the models, OEM is also available, delivery time need to be final confirmed on both sides.
4.Q: What is the cost of machine installation,debugging and training?
A:Welcome foreign customers come to our Company, we provide all the place and equipment in your training time;as your requirement, we can also arrange technical engineer to the customer location to installation and training, all expenses of engineer will be borne by the Customer party.
5.Q: What is the guarantee policy? Quality guarantee time?
A: The guarantee period of quality shall be 12 months counting from the date on which the commodity arrives at the port of destination. Except the damage artificially ,we are responsible for offering the fittings free of charge during the guarantee period, but you must send the damaged fittings to us by courier with your charge before we send back the alternative fittings to you. After the guarantee of quality period, the parts required to repair or change, if any, shall be paid.
Product Feature:
1) Positioning automatically, no need any jig or fixture;
2) Any pattern and format ok for cutting via CNC laser control system with computer control;
3) Sealed design for rack and guide rail to make sure longer lifetime and higher precision;
4) No need reflection mirror, lower maintenance cost;
5) No need any adjustment for laser route;
Parameter
Model | GS-LFD3015 |
Laser source medium | Fiber |
Laser power | 500W - 1500W |
Cutting range(L*W) | 3000 mm × 1500 mm |
Z axle stroke | 100 mm |
Max. cutting speed | 36 m/min |
Max. positioning speed | 120 m/min |
Wok platform size/Max height of feeding material | 4250x2500mm / more than 120mm |
Cooling form | water cooling |
Laser wavelength | 1070 nm |
Min. cutting gap | ≤0.1 mm |
Positioning accuracy of X, Y and Z axles | ±0.03 mm |
Repeated positioning accuracy of X, Y and Z axles | ±0.01 mm |
Thickness of cutting material (according to material) | 0.2-14 mm |
Drive model | Imported servo motor |
Power requirement | 380V, 50 / 60Hz |
Working temperature | 5 - 45 ºC |
Continuous working time | 24 Hours |
Machine weight | About 6750 Kgs |
Outer dimension | 4270 mm * 2280 mm * 1750 mm |
Total protection level of power supply | IP54 |
Advanced Control Function:
1. Height sensor automatic calibration function:
Manual height sensor calibration is inconvenient and cumbersome, and requires high level operators. With the PA8000 laser cutting system using automatic calibration method, no cumbersome operations are needed, and the CNC laser cutter can rapidly calibrate the height sensor automatically.
2. Change to pulsing at corner cutting control function:
When the sharp corner of a thin to medium carbon steel sheet is cut, melting loss will occur easily, so the quality of the cutting section of the sharp corner can't be guaranteed. With the PA8000 laser cutting system using the change to pulsing at corner cutting control function, the laser power, pulse frequency and pulse duty factor are changed for sharp corner cutting, and the CNC laser cutter restores the previous control mode after passing the sharp corner, thus guarantees the section quality of outline cutting of sharp corners and the efficiency of cutting.
3. Pause and deceleration at corner function:
In the fusion cutting of high temperature alloy sheets such as stainless steel and aluminum alloy sheets, etc., the sharp corners are hard to cut, with back splattering and contamination of focus lens occurring easily. With the PA8000 laser cutting system using the pause and deceleration at corner function, dross back splattering seldom occurs, thus significantly improves the stability of sharp corner cutting of such alloy sheets, reduces the contamination of focus lens, and prolongs the useful life of focus lens.
4.Leader-line low start-up speed cutting function:
In the fusion cutting of high temperature alloy sheets such as stainless steel and aluminum alloy sheets, etc., dross back splattering and sensor collision alarm, etc. occur easily, which will cause abnormal interruption of cutting and contamination of lens. With the PA8000 laser cutting system using the leader-line low start-up speed cutting function, the leader-line low start-up speed cutting mode can be selected according to the characteristics of fusion cutting of such alloy sheets, thus significantly improves the stability of fusion cutting of such alloy sheets, eliminates dross back splattering and easy interruption of cutting, significantly reduces the contamination of focus lens, and prolongs the useful life of focus lens.
Widely used in sheet metal processing, aviation, aerospace, electronics, electrical appliances, tube fittings, automobile, food machinery, engineering machinery, precision parts, ships, metallurgical equipment, elevators, household appliances, kitchen utensils and appliances, craft gifts, tool processing, decoration, advertising and other manufacturing industries.
HANS GS FAQ:
1.Q: Are you a factory or trading company?
A:We are a manufacturer with $13 million registered capital & 20000 square meters Han's Goldensky Science and technology park.
2.Q: What is the payment terms?
A:The payment terms we accept include: Western Union, Cash, L/C, T/T (30% advance payment as deposit, 70% balance payment should be paid before shipment.)
3.Q: How long is the delivery date?(After getting the deposit)
A: It is different from 25-45 workdays according to the models, OEM is also available, delivery time need to be final confirmed on both sides.
4.Q: What is the cost of machine installation,debugging and training?
A:Welcome foreign customers come to our Company, we provide all the place and equipment in your training time;as your requirement, we can also arrange technical engineer to the customer location to installation and training, all expenses of engineer will be borne by the Customer party.
5.Q: What is the guarantee policy? Quality guarantee time?
A: The guarantee period of quality shall be 12 months counting from the date on which the commodity arrives at the port of destination. Except the damage artificially ,we are responsible for offering the fittings free of charge during the guarantee period, but you must send the damaged fittings to us by courier with your charge before we send back the alternative fittings to you. After the guarantee of quality period, the parts required to repair or change, if any, shall be paid.
CNC fiber laser cutting manchine is cutting-table structure designed machine with dual drive, effctive cutting range is from 1500mm to 6000mm. High-precision longitudinal and transverse linear rails drive high-precision helical gear and rack and it is available in speed up to 8000mm/min. Accelerated speed is 1G. Exchanging work tables are optional that optimize cutting productivity.
Made in China CNC fiber laser cutting machine
1.Technical specifications of CNC fiber laser cutting machine
Effective cutting length: 3000mm
Effective cutting width:1500mm
Max. speed:10000mm/min(returning speed)
CNC system:FSCUT
Laser generator:RFL-1000(Domestic sharp branch)
Smoke purification device: CCQ-9000
Cutting torch: 1group( Cyplite )
Torch THC:BCS100,elevating distance≥100mm
2.cutting speed parameter of CNC fiber laser cutting machine
The laser power and the cutting material thickness under certain conditions,
cutting speed varies with the composition of the material, specifically the ability
of different sheet metal cutting table below (for reference).
|
|
thickness (mm) |
speed (mm/min) |
pressure (MPA) |
thickness (mm) |
speed (mm/min) |
pressure (MPA) |
|
1000W
|
1mm |
12000 |
0.6 |
1mm |
15000 |
1.6 |
|
2mm |
6000 |
0.6 |
2mm |
5400 |
2.0 |
|
|
3mm |
3600 |
0.5 |
3mm |
1800 |
2.3 |
|
|
4mm |
2700 |
0.4 |
4mm |
1100 |
2.5 |
|
|
6mm |
1200 |
0.15 |
|
|
|
|
|
8mm |
960 |
0.13 |
|
|
|
|
|
10mm |
600 |
0.13 |
|
|
|
3.RFL-1000 performance parameters of the fiber laser
|
parameter |
RFL-1000 |
|
rated input voltage |
220±10%VAC |
|
modulation frequency |
50kHZ |
|
wave length |
915nm |
|
laser power |
1000W |
|
power consumption |
<2kW |
|
Size (length X width X height) |
485mm X 237mm X 663mm |
|
weight |
<50Kg |
|
gas |
Air: 9 oxygen bar: 8 bar nitrogen: 27 bar |
CNC Fiber Laser Cutting Machine, CNC Fiber Laser Cutter, CNC Fiber Laser Cutting Machinery, CNC Fiber Laser Router
Head Science & Technology Corporation http://www.longxuanmachines.com